Español  English 
COSTAQ - Audio Profesional & Instrumentos Musicales en Costa Rica
My Account  |  Cart Contents  |  Checkout | My Wishlist 
Top » Catalog » Recording Gear » Monitoring » Active Monitoring » Quested S7R Self Powered - Near Field Monitoring (ea)
Quested S7R Self Powered - Near Field Monitoring (ea)
[Q-S7R] Self Powered - Near-Field Monitors (ea)
Other images for this product:


 
Retail Price:
$1,569.99+IV
COSTAQ Savings:
- $145.00
COSTAQ Price:
$1,424.99+IV

Quantity
 
    Payment Methods:

82




Free Shipping in Costa Rica
Global Warranty in Costa Rica
Tech Support in Costa Rica

QUESTED S7R

Near-Field Monitors



  • The S7R is a self-powered, 2-way active monitor.

    Two class A-B amplifiers capable of delivering a total of 190 Watts RMS are mated to an enclosure tuned with a double flared port designed to minimise any possible low frequency “chuffing”. The result is an extremely powerful, neutral, articulate and accurate compact monitor perfect for a wide range of music styles from acoustic jazz to house.

    The frequency response is more than adequate for most applications, it can however be extended down to 25Hz when coupled to the SB10R sub-woofer. The S7R is fully magnetically shielded, so can be used in close proximity to CRT monitors. All S-Series monitors are phase coherent with each other enabling them to be used in combination in multi-channel systems

    Some typical applications include components in multi-channel systems, postproduction, project studios, location recording, and mastering.

     


  • features
     


  • Specifications

    Size (WxHxD)

    244(w) x 347(h) x 308(d) mm

    Weight

    11.7 kgs

    Drivers

    Bass cone - 1 x 165 mm (6 ½ ")
    High Frequency soft dome - 1 x 28 mm (1 ?")

    Maximum SPL

    107dB (c) continuous pink noise @ 1 m (119º dB (c) per pair RMS music)

    Frequency Response

    65 Hz-20 kHz ± 2 dB

    Input

    Connector

    XLR and 1/4 inch Jack combo socket

    Impedance

    10k electronically balanced with RF filters

    Wiring

    Pin 1 ground Sleeve
    Pin 2 hot Tip
    Pin 3 cold Ring

    Sensitivity

    -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear

    Filters

    Subsonic

    -3dB @ 30 Hz, 24dB/oct

    Ultrasonic

    -3dB @ 75kHz, 4dB/oct

    Crossover

    1k19

    LF EQ

    -2/-4 @ 65 Hz

    HF EQ

    +/- 2dB @ 10 kHz

    Power Amplifier

    LF output power

    > 120W RMS

    HF output power

    > 70W RMS

    T.H.D.

    < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz.

    Hum + Noise

    > -100 dB referred to clip

    NOTE 1: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.

    Indication

    Power on

    Front mounted green LED indicates power applied.

    Clip

    Red LED 2 dB before amplifier clip.

    Power requirements

    Voltage

    Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC
    230V setting: min 160V; restricted output power: max 255V
    115V setting: min 80V; restricted output power: max 127V

    Consumption

    Quiescent

    18W

    Typical use

    75W (average music)

    Max

    140W (average music)

    Note

    0 dBu = 775 mV into open circuit

     








  •  

Available
 

NEWSLETTER
E-mail:
*
Confirmar:
*
Nombre:
*
Apellido:
*
Sexo:
*
País:
*


Contents & Images Copyright © 2009-2013 Costaq Punto Com S.A.
Costaq is a registered trademark of Costaq Punto Com S.A. | Cédula Jurídica: 3-101-401264. All Rights Reserved.
A company

Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Costaq catalog or website. Prices subject to change without notice.

CONTACT US: COSTAQ