Peluso Microphone Lab CEMC6 Stereo Kit
Solid State Pencil Condenser Microphone
Peluso Microphone Lab CEMC6 Stereo Kit
|
|
The CEMC-6 is a highly regarded transformerless pencil condenser. The preamp body and circuitry are believed to be manufactured by Feilo in China (see the CR1-14), but the detachable capsules are skinned and tuned by Peluso in the US.
Four 20mm capsules (with 17mm, 6-micron diaphragms) are available:
- Cardioid
- Wide Cardioid
- Omnidirectional
- Hypercardioid
These capsules should also fit and function with the CR1-14 and the Advanced Audio CM-54.
The mic ships with a cardioid capsule (the others are available separately) and a mic clip in a padded wooden box. Shockmounts are also available separately.
The mic bodies and capsules are also available in matched stereo pairs; see the "CEMC6 Stereo Kit" link.
Nicks Picks.com
I ran through all of the capsules, and thought that the cardioid cap is one of the best I've heard. Easily smoking any other condenser mic out there under a grand.
|
-
Type: Condenser Pressure Gradient w/ 20mm capsule
Frequency Range: 19Hz/25Khz
Polar Pattern: Cardioid w/ removable capsule
Sensitivity: 10mv/pa
Impedance: 200 ohms
SPL: 156 db w/ 20db pad
Equivalent Noise: 14db (A-weighted)
Power Requirements: Phantom - 48v +- 4v
Current Consumption: < 3.0 MA
Size: 22mm x 164mm
Weight: 134 g
|
| Compatible Capsules |
| |
| Peluso Microphone Lab CEMC-6 Cardioid |
17mm Cardioid capsule
Sensitivity: 10 mV/Pa
Freq. Resp.: 19 - 25,000 Hz
|
| Peluso Microphone Lab CEMC-6 Omni |
17mm Omnidirectional capsule
Sensitivity: 10 mV/Pa
Freq. Resp.: 19 - 25,000 Hz |
| Peluso Microphone Lab Hypercardioid capsule for CEMC-6 |
17mm Hypercardioid capsule
Sensitivity: 10 mV/Pa
Freq. Resp.: 19 - 25,000 Hz
|
| Peluso Microphone Lab Wide Cardioid capsule for CEMC-6 |
17mm Wide Cardioid capsule
Sensitivity: 10 mV/Pa
Freq. Resp.: 19 - 25,000 Hz |
| Pads & Filters |
Impedance |
SPL/Noise |
- Pad: -20dB (Via Switch)
- Pad: -10dB (Via Switch)
- Pad: 0 (flat) (Via Switch)
- Filter: HPF, 75Hz (Via Switch)
- Filter: flat (Via Switch)
- Filter: HPF, 150Hz (Via Switch)
|
200 Ohms (Low) |
Max SPL: 156 dB
Self-noise: 14.0 dB(A) |
| Weight |
Length |
Max Diameter |
Interface(s) |
| 134g (4.73oz) |
164mm (6.46") |
22mm (0.87'') |
3-pin XLR male (1) |
| Power Specifications |
- Requires phantom power
- Phantom voltage: 48 ± 4v
|
